Captive Works Sort By: Product. The CaptiveWorks CW-600S Premium comes with an outstanding set of features making it truly one of the best digital satellite. Captiveworks CW-600S Captiveworks CW-600S Premium Viewsat VS2000 Pro Neusat SP-6000 Pansat 2700A. USER’S MANUAL USER’S MANUAL - 3 - - 4 - Pansat Hd9000.

Posted on Tuesday, November 04, 2008 - 19:22 GMTPlymouth, As I informed you before: Loading the wrong bin file resulted in 0000 on the receiver display and a green TV screen. Both the forwarded factory file and bin file 2.05 were loaded, as advised. The video image consists of colors scattered all over the screen 2. Pressing 'Menu' on the remote control switches the receiver off 3.

Pressing 'EPG' produces a PIP screen 4. No list appears on pressing 'FAV' Hope this additional information will assist in finding a solution. Appreciate your support. Please advise. Regards, Eugene. Posted on Tuesday, November 04, 2008 - 19:45 GMThey young albert try this it may help.courtesy of crazyfta.net CaptiveWorks CW-600S - Loaded Wrong Bin File Problem - Repair Guide What to do when you accidentally loaded the wrong bin file.

CaptiveWorks receivers are very forgiving. Either the CaptiveWorks CW-600S or the CW-600S Premium can fix itself. Just do the following. STOP - Do NOT try to put the correct bin on anymore. Power off the receiver from the rear power switch.

Autodesk true review. Accelerate projects from start to finish with Autodesk Design Review, the all-digital way to review, mark up, and track changes to 2D and 3D designs without the original creation software. Important: A computer restart may be necessary to install Autodesk Design Review software. We recommend that you save open files and close all applications before installing this product. Download the free Autodesk Design Review DWF viewer, the all-digital way to view, mark up, measure, print, and track changes to 2D and 3D design files. Worldwide Sites You have been detected as being from.

Turn on the power ON from the rear AND at the same time hold in the front power button for 5 seconds. The receiver will display 'BOOT' and it is now in boot mode. That is what we want, and you can let go off the front power button when this is displayed. Now, load the factory bin file. Next, Load the CORRECT new bin file this time. Activate patch.

(F1 and 000) 7. Setup dish antennas and scan channels.

There you go, your CaptiveWorks CW-600S receiver is now back up and running!!